2008 Arctic Cat ATVs factory service and repair manual, Page 77Get this manual
INOTE: When removing the right-side cover, account for the release roller guide that it does not fall and cause damage 4Remove the release roller assemblyAccount for four springs
5Remove the centrifugal clutch-shoe nut (left-hand threads) and washer from the driveshaft; then using primary clutch shoe remover, remove the clutch shoeBPrimary Clutch Shoe CPrimary Clutch DCentrifugal Clutch Housing
INOTE: Steps 1-2 in the preceding sub-section must precede this procedure
Care must be taken when removing the nut; it has "left-hand" threads
6Remove the primary drive one-way clutch from the centrifugal clutch housingNote the word OUTSIDE stamped on the clutch for assembly purposes