2008 Arctic Cat ATVs factory service and repair manual, Page 72Get this manual
Install the ratchet onto its pin making sure the end is properly installed on the reelInstall the shaft, spring, and the spring cover; then install the friction plate with the ratchet guide fitting into the ratchetWhile nushins down on the reelinstall the nut 2Shift fork thickness must be within specificationsMEASURING SHIFT FORK GROOVE (Width)
1Using calipers, in turn measure the width of each shift fork groove
9With the 50 cm (20 in of rope exposed, hook the rope in the notch of the reel
2Shift fork groove width must be within specificationsMEASURING SHIFT FORK TO GROOVE (Side Clearance)
1In turn, insert each shift fork into its groove