2008 Arctic Cat ATVs factory service and repair manual, Page 71Get this manual
8Unwind the rope from the reel and remove the ropeCleaning and Inspecting INOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
Clean all componentsInspect the springs and ratchet for wear or damageInspect the reel and case for cracks or damageInspect the shaft for wear, cracks, or damageInspect the rope for breaks or frayingInspect the spiral spring for cracks, crystallization, or abnormal bendsInspect the handle for damage, cracks, or deteriorationAssembling
5Carefully lift the reel free of the case making sure the spiral spring does not accidentally disengage from the case
1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting lug in the case; then wind it in counterclockwise direction until the complete spring is installedINOTE: The spiral spring must seat evenly in the recoil case