2008 Arctic Cat ATVs factory service and repair manual, Page 28Get this manual
9Shift the transmission into each of the remaining positions and veri that the appropateicon is displayed for the silected gear ihiftAposition(H High7LLow, andReverse)HNOTE: An (Error) in the gear position icon indicates no signal or poor ground wire connection in the circuitTroubleshoot the harness connectors, gear shift position connector, gear shift position switch, and LCD connector The frame7welds, and racks should be checked periodically for damage7bends, cracks, deterioration, broken components, and missing components, 1f replacement or repair constitutes removal, see Section 8
2Compress the brake leverlpedal several times to check for firm brakeIf the brake is not firm7the system must be bled
3TObleed the brake System, Use theiPro-? n! cedure
Electrical Connections
The electrical connections should be checked periodically for proper fknctionIn case of an electrical failure, check fkses7connections (for tightness7corrosion7 damage), andlor bulbsIf an electrical component needs to be tested for proper fimction, see Section 5