2008 Arctic Cat ATVs factory service and repair manual, Page 9Get this manual
Clean the engineRemove the cloth from the exhaust systemCheck all control wires and cables for signs of wear or frayingReplace if necessaryChange the engineltransmission oil and filterOn liquid cooled models, check the coolant level and add properly mixed coolant as necessaryCharge the battery; then installConnect the battery cables A CAUTION
Connect the positive battery cable first; then the negative
7Check the entire brake systems (fluid level, pads, etc, all controls, headlights, taillight, brakelight, and headlight aim; adjust or replace as necessary8Tighten all nuts, bolts, cap screws, and screws making sure all calibrated nuts, cap screws, and bolts are tightened to specifications9Check tire pressureInflate to recommended pressure as necessaryl Make sure the steering moves