2008 Arctic Cat 700 Diesel ATV Service Manual, Page 170Get this manual
8Install the instrument pod and ignition switch; then secure with two reinstallable rivets and the ignition switch lock collar9Install the steering post cover and secure with the reinstallable rivets; then install and secure the radiator access panel10Install the left-side and right-side engine covers 2Inspect the footrest weldments for cracks or unusual bends3Inspect all tubing for cracks or unusual bendsINSTALLING 1Secure the footrests to the frame with four cap screws and two flange nuts; then tighten securely2Place the footwells onto the footrests; then put the foot pegs in position and secure with two cap screws3Install the machine screws and flange nuts securing the front and rear fenders to the footwells
Footrests
REMOVING 1Remove the machine screws and flange nuts securing the front and rear fenders to the footwells
Belly Panel
REMOVINGINSTALLING 1Remove the machine screws and shoulder washers securing the belly panel to the underside of the frame; then remove the belly panel2Place the belly panel into position on the underside of the frame; then install the machine screws and shoulder washersTighten securely