2008 Arctic Cat 700 Diesel ATV Service Manual, Page 162Get this manual
INSTALLING 1Place the steering post into position; then secure the lower bearing flange to the frame with two cap screwsTighten to 20 ft-lb KX039
9Remove two cap screws securing the lower steering post bearing flange to the frame; then remove the steering postAL600D
2Place the upper steering post bearings into the housings; then position on the steering post and secure the housings to the frame with two cap screwsTighten to 20 ft-lb
CLEANING AND INSPECTING
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary