2008 Arctic Cat 700 Diesel ATV Service Manual, Page 161Get this manual
SteeringFrame NOTE: Critical torque specifications are located in Section 1
5Remove the four cap screws securing the handlebar caps and instrument pod bracket to the steering post; then move the handlebar out of the wayAccount for four handlebar caps6Remove two cap screws securing the upper steering post bearing to the frameAccount for two bearings and two housings
Steering Post Tie Rods
REMOVING 1Remove the ignition switch retaining ring; then remove the reinstallable rivets securing the instrument pod to the mounting bracket and remove the podNOTE: It is not necessary to disconnect any wires from instrument pod componentsCD760