2008 Arctic Cat 700 Diesel ATV Service Manual, Page 159Get this manual
NOTE: Be sure all tires are the specified size and have identical tread pattern 3Check the front wheel toe-in and toe-out and adjust as necessary (see Section 8)4Test drive the ATV on dry, level surface and note any pulling to the left or right during acceleration, deceleration, and brakingNOTE: If pulling is noted, measure the circumference of the front and rear tires on the pulling sideCompare the measurements with the tires on the opposite sideIf pulling is noted during braking only, check and adjust the brakes as necessary and recheck operation (see Section 2)
2Inspect the tires for damage, wear, or punctures
! WARNING
Do not operate the ATV if tire damage exists
5Increase the air pressure in the tires with the smallest circumference measurement until all tires are equal in circumference6Repeat steps 4-5 as necessary to ensure proper handling