2008 Arctic Cat 700 Diesel ATV Service Manual, Page 158Get this manual
10Secure the shock absorber to the lower A-arm with cap screw and new lock nutTighten to 20 ft-lb11Secure the boot guard to the lower A-arm with the two cap screwsTighten securely12Install the wheel and tighten to 45 ft-lb13Remove the ATV from the support stand REMOVING 1Secure the ATV on support stand to elevate the wheels
! WARNING
Make sure the ATV is solidly supported on the support stand to avoid injury
Wheels and Tires
KEY 123456789101112
2Remove the wheelsNOTE: Keep left-side and right-side wheels separated for installing them on their proper sides
CLEANING AND INSPECTING
Screw Brake Disc Wheel HubFront Hub Stud Wheel HubRear Hex Nut Cotter Pin Wheel Mounting Nut Tire Valve Stem Valve Stem Cap 0741-559
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
1Thoroughly clean the wheels and hubs using pressure washer2Clean the tires with soap and water3Inspect each wheel for cracks, dents, or bends4Inspect each tire for cuts, wear, missing lugs, and leaksINSTALLING