2008 Arctic Cat 700 Diesel ATV Service Manual, Page 141Get this manual
NOTE: Prior to installing the seal, apply High-Performance #2 Molybdenum Disulphide Grease to the seal
3Pour 275 ml (9.3 fl oz) of SAE 80W-90 hypoid lubricant into the differential and install the filler plugTighten to 16 ft-lb4Install the front drive actuator with the three torx-head cap screws; then connect the wire connector to the main wiring harness
4Install the seal into the housing pressing evenly on the outside edge until the seal is seated