2008 Arctic Cat 700 Diesel ATV Service Manual, Page 124Get this manual

2008 Arctic Cat 700 Diesel ATV Service Manual, Page 124

4Connect the battery (B+) wire and connect the regulator control plug-in; then connect the negative battery cable to the battery5Install the left-side engine cover and seat making sure the seat latches securely DE519C

Neutral StartFront Drive Actuator Start-in-Gear Differential Lock 2WD Relays
The relays are identical plug-in type located on the power distribution moduleRelay function can be checked by switching relay positionsThe relays are interchangeableNOTE: The module and wiring harness are not serviceable component and must be replaced as an assembly

4Remove the adjuster cap screw and pivot bolt and remove the alternatorNOTE: The alternatorregulator is not serviceable part; therefore, it must be replaced as an assembly
Headlights
The connectors are the four 2-prong ones secured to the front bumper supports (two on each side) with cable tiesBULB VERIFICATION (Low and High Beam)