2008 Arctic Cat 700 Diesel ATV Service Manual, Page 114Get this manual
Electrical System NOTE: Some photographs and illustrations used in this section are used for clarity purposes only and are not designed to depict actual conditionsNOTE: Critical torque specifications are located in Section 1
Accessory ReceptacleConnector
NOTE: This test procedure is for either the receptacle or the connector
VOLTAGE 1Turn the ignition switch to the ON position; then set the meter selector to the DC Voltage position2Connect the red tester lead to the redwhite wire or the positive connector; then connect the black tester lead to ground3The meter must show battery voltageNOTE: If the meter shows no battery voltage, troubleshoot the battery, fuse, receptacle, connector, or the main wiring harness
SPECIAL TOOLS number of special tools must be available to the technician when servicing the electrical systemDescription
Fluke Model 73 Multimeter Peak Voltage Reading Adapter
0644-191 0644-307
NOTE: Special tools are available from the Arctic Cat Service Parts Department