2008 Arctic Cat 700 Diesel ATV Service Manual, Page 96Get this manual
Installing EngineTransmission NOTE: Arctic Cat recommends that new gaskets and O-rings be installed whenever servicing the ATVNOTE: If the enginetransmission was removed as an assembly, proceed to EngineTransmission in this sub-sectionIf only the transmission was removed, use the following procedure to install
TRANSMISSION 1If the V-belt housing was removed from the crankcase, support the engine on blocks and using new gasket, install the V-belt housing and tighten the mounting cap screws to 25 ft-lb
4Install the PTOflywheel onto the crankshaft and secure with five cap screwsTighten to 40 ft-lb