2008 Arctic Cat 700 Diesel ATV Service Manual, Page 94Get this manual
! WARNING
NEVER force the piston into the cylinderIf sudden resistance is encountered, remove and start over as rings may not have been compressed sufficientlyForcing will cause severe ring andor ring land damage
22Repeat steps 15-21 for the second piston23Install the oil pump (see Section 4)24Install the water pump (see Section 4)25Install the cylinder head (see Top-Side Components in this section)26Trim off the excessive material and cover the ends of the lateral seals with RTV Silicone; then place new oil pan gasket in place making sure to properly align the gasket with the oil sump and return galleys