2008 Arctic Cat 700 Diesel ATV Service Manual, Page 81Get this manual
NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment ENGINE BLOCK ASSEMBLY Removing 1Remove the enginetransmission assembly (see Removing EngineTransmission in this section)DE117A
13Install two springs and two contact pins in the end of the gear shift shaft; then install the gear shift position switch with new O-ring and tighten the cap screws securely
2Separate the transmission and V-belt housing from the engine (see Right-Side Components in this section)3Remove the timing belt (see Left-Side Components in this section)4Remove the cylinder head assembly (see Left-Side Components in this section)5Remove the oil pump assembly (see Left-Side Components in this section)6Remove the cap screws securing the oil pan assembly; then remove the oil pan assemblyAccount for two O-rings and gasket