2008 Arctic Cat 700 Diesel ATV Service Manual, Page 47Get this manual

2008 Arctic Cat 700 Diesel ATV Service Manual, Page 47


NOTE: soft brass wire brush is recommended for cleaning injector seating surfaces
8Repeat steps and for the second injector if it was removed9Install the injector hold-down nuts and tighten in five steps to 15 ft-lb in ft-lb increments
6Orient the flame washer so the double ribs are directed toward the injector tip; then install the copper washer on the injector
DE329 DE569A

Back to 2008 Arctic Cat 700 Diesel ATV Service Manual