2008 Arctic Cat 700 Diesel ATV Service Manual, Page 17Get this manual
7Adjust each headlight by turning the adjuster knob clockwise to raise the beam or counterclockwise to lower the beam Stop the ATV completely and shift the transmission into the positionThe reverse gear indicator light should be illuminated
! WARNING
Never shift the ATV into reverse gear when the ATV is moving as it could cause the ATV to stop suddenly throwing the operator from the ATV
If the reverse light does not illuminate when shifted to the reverse position, the switch may be faulty, the fuse may be blown, the bulb may be faulty, connection may be loose or corroded, or the lever may need adjustingTo adjust, proceed to Adjusting Shift LeverADJUSTING SHIFT LEVER
1Place the shift lever in the position; then remove the seat and left-side engine cover2With the ignition switch in the ON position, loosen jam nut (A) (left-hand threads); then loosen jam nut (C) and with the shift lever in the reverse position, adjust the coupler (B) until the transmission is in reverse and the (R) icon appears on the LCD