2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 416Get this manual
2Place the footwells onto the footrests; then put the foot pegs in position and secure with two cap screws3Install the machine screws and flange nuts securing the front and rear fenders to the footwells Belly Panel
REMOVINGINSTALLING
Footrests
REMOVING 1Remove the machine screws and flange nuts securing the front and rear fenders to the footwells
1Remove the machine screws and shoulder washers securing the belly panel to the underside of the frame; then remove the belly panel2Place the belly panel into position on the underside of the frame; then install the machine screws and shoulder washersTighten securely
Exhaust System