2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 415Get this manual
2Connect the headlight connectors to the appropriate headlights and the front accessory plug wires to the accessory plug
7Install the left-side and right-side splash panels and tighten the cap screws securelyInstall new nylon ties in the appropriate locations8Install the instrument pod and ignition switch; then secure with two reinstallable rivets and the ignition switch retaining ring9Set the storage compartment box into position; then install the storage compartment cover making sure the mounting lugs engage the slotsSlide rearward to secure and lock by engaging the lid lock
3Make sure the rubber grommets and bushings are in place; then place the front rack into position and secure with the cap screws and lock nutsTighten securely4Install one machine screw and flange nut and four plastic rivets on each side to secure the front fenders to the footwellsTighten the flange nuts securelyNOTE: If the footwells have been removed, see Footrests in this section