2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 412Get this manual
10Connect the positive battery cable; then connect the negative battery cableTighten the battery terminal cap screws securely11Install the battery covertool tray; then install the seatMake sure the seat locks securely (TRV500700 EFIH1 Models)
Front Body Panel Side Panels
5Install eight cap screws and flange nuts securing the right-side footwell to the front and rear fenders; then place the left-side foot peg into position and secure with two screws and flange nutsTighten securely6Place the storage compartment into position; then install the steering post coverSecure with the reinstallable rivets
REMOVING 1Remove the reinstallable rivets securing the radiator access cover and remove the cover; then remove four reinstallable rivets securing the steering post cover and remove the cover