2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 411Get this manual
6Remove the front and rear racks; then remove the two body bolts adjacent to the air filter housing and two push nuts located behind the grille CLEANING AND INSPECTING
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
1Clean all fender components with warm soap and water2Inspect fenders for cracks andor loose rivets3Inspect for any missing decalsINSTALLING 1Place the body assembly into position on the ATVCF201A
NOTE: If the front and rear body panels have been separated, proceed to step 2; if the panels have not been separated, proceed to step 3
2Install the torx-head cap screws and lock nuts securing the front and rear body panels togetherTighten securely