2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 400Get this manual
11Secure the boot guard to the lower A-arm with the two cap screwsTighten securely12Install the wheel and tighten to 40 ft-lb13Remove the ATV from the support stand 2Remove the wheelsNOTE: Keep left-side and right-side wheels separated for installing them on their proper sides
CLEANING AND INSPECTING
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
Wheels and Tires
KEY 123456789101112
1Clean the wheels and hubs using pressure washerShoulder Screw Brake Disc Wheel HubFront Hub Stud Wheel HubRear Hex Nut Cotter Pin Wheel Mounting Nut Tire Valve Stem Valve Stem Cap
2Inspect each wheel for cracks, dents, or bends3Inspect each tire for cuts, wear, missing lugs, and leaksINSTALLING Install each wheel on its hubTighten to 40 ft-lbNOTE: Make sure each wheel is installed on its proper hub as noted in removing (the "rotation arrow" (if applicable) must indicate forward direction of rotation)
0741-559
TIRE SIZE