2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 391Get this manual
6Tighten the hub nut (from step 4) to 200 ft-lb; then install and spread new cotter pin making sure each side of the pin is flush to the hub nut
! CAUTION
Brake fluid is highly corrosiveDo not spill brake fluid on any surface of the ATV and do not reuse brake fluid
3Remove the brake hose from the caliper; then remove the caliper and plug the brake fluid port4Compress the caliper holder against the caliper and remove the outer brake pad; then remove the inner brake pad
7Install the wheel and tighten to 40 ft-lb8Remove the ATV from the support standPR237