2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 385Get this manual
11Remove the ATV from the support stand 9Place drain pan under the ATV to contain any oil leakage; then using slide hammer, remove the drive axle
Drive Axles
REMOVING REAR DRIVE AXLE 1Secure the ATV on support stand to elevate the wheels
! WARNING
Make sure the ATV is solidly supported on the support stand to avoid injury
2Pump up the hand brake; then engage the brake lever lock3Remove the wheel4Remove the cotter pin securing the hex nut; then remove the hex nutRelease the brake lever lock
REMOVING FRONT DRIVE AXLE
NOTE: For removing front drive axle, see Front Differential in this section
CLEANING AND INSPECTING