2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 373Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 373


12Support the axle to not allow it to drop or hang
16Remove the inner fender panels17Using T-30 torx wrench, remove the three screws securing the front drive actuator to the gear case; then remove the actuator
! CAUTION
The axle must be supportedIf the axle is allowed to drop or hang, damage to the inner CV joint may occur
13Remove the lower shock boltsAccount for the lock nuts; then move the shocks aside and secure them with strap

Back to 2008 Arctic Cat 400/500/650/700 ATV Service Manual