2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 372Get this manual
2Remove the drain plug and drain the gear lubricant into drain pan; then reinstall the plug and tighten to 45 inlb AF895D
9Remove the tie rod lock nutsATV0082A
3Remove the front wheels4Pump up the hand brake; then engage the brake lever lock5Remove the cotter pin securing the hex nut; then remove the hex nut and washer
10Remove the upper ball joint cap screws taking care not to strip the threads on the ball joint shaft; then using rubber mallet, tap the end of the axle and free it from the knuckle assembly