2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 343Get this manual
Electrical System This section has been organized into sub-sections which show procedures for the complete servicing of the Arctic Cat ATV electrical systemNOTE: Some photographs and illustrations used in this section are used for clarity purposes only and are not designed to depict actual conditions
500650 H1
Ignition Timing Spark Plug Type Spark Plug Gap Spark Plug Cap Ignition Coil Resistance 10 BTDC 1500 RPM NGK CR6E 0.7-0.8 mm (0.028-0.032 in 8000-12,000 ohms (500) 4000 ohms (650 H1) (primary) Less than ohm (terminal to ground) (secondary) 5200-7800 ohms (high tensionplug cap removedto ground)
SPECIAL TOOLS number of special tools must be available to the technician when performing service procedures in this sectionDescription
Diagnostic Harness Fluke Model 73 Multimeter MaxiClips Peak Voltage Reading Adapter Test PlugError Code List Kit
Ignition Coil (primaryCDI) 140.0-215.0 DC volts500 Peak Voltage 142.4-213.6 DC volts650 H1 (terminal to ground) Stator Coil Resistance Peak Voltage AC Generator Output (trigger) 160-240 ohms (green to blue) (charging) Less than ohm (black to black) (signal) Less than ohm (yellow to white) (trigger) 4.2-6.3 volts (green to blue) (signal) 0.4-0.6 volts (yellow to white) (no load) 60 AC volts 5000 RPM (black to black) 325W 5000 RPM