2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 325Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 325


7Secure the needle jet holder with wrench; then remove the main jet8Remove the needle jet holder; then remove the needle jet, slow jet, and the starter jet9Remove the pilot screwAccount for spring, washer, and an O-ring

5Remove the float pin

10Unscrew and remove the idle adjust screwAccount for the spring and washerCLEANING AND INSPECTING
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary

Back to 2008 Arctic Cat 400/500/650/700 ATV Service Manual