2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 299Get this manual
NOTE: The enginetransmission does not have to be removed from the frame for this procedure Removing Right-Side Components
AV-Belt Cover BDriven Pulley CClutch Cover 1Remove the cap screws securing the V-belt cover; then using rubber mallet, gently tap on the cover tabs to loosen the coverAccount for gasket2Remove the bearing cap; then using Spanner Wrench to hold the drive pulley, remove the cap screw from the clutch shaftFI429A
4Make match marks on the fixed drive face and the movable drive face; then remove the movable drive face