2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 269Get this manual
3From the left side, install the three case half mm cap screws (two inside the case); then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 6From the right side, install the case half mm cap screws (one inside the case); then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs
4From the right side, install the case half mm cap screws; then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs
7In crisscrosscase-to-case pattern, tighten the mm cap screws (from steps 3-4) until the halves are correctly joined; then tighten to 16 ft-lbNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs
8In crisscrosscase-to-case pattern, tighten the mm cap screws (from steps 5-6) to ft-lbNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs