2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 253Get this manual
2Remove the left-side mm cap screws securing the crankcase halvesNote the location of the wiring formNote the location of the different-lengthed cap screws CC067D
24Install the coolant hose on the water pump and secure with the clamp
Center Crankcase Components
NOTE: This procedure cannot be done with the enginetransmission in the frameComplete Removing procedures for Top-Side, Left-Side, and Right-Side must precede this procedureNOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
3Remove the left-side mm cap screws (two from inside the case) securing the crankcase halvesNote the location of the different-lengthed cap screws