2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 246Get this manual
2In turn place each driven plate on the surface plate; then using feeler gauge, measure warpage in several locations CC163D
AT THIS POINT
To service center crankcase components only, proceed to Separating Crankcase HalvesCC245D
3Maximum driven plate warpage must not exceed specificationsMeasuring Clutch Drive Plate (Fiber) Thickness 1Using calipers, in turn measure the thickness of each drive plate in several locations
Servicing Right-Side Components
NOTE: Whenever part is worn excessively, cracked, damaged in any way, or out of tolerance, replacement is necessary
PRIMARY CLUTCH ASSEMBLY (InspectingMeasuringAssembling)
NOTE: Prior to inspecting and measuring components, it is recommended that all components be removed from the primary gear assembly and be cleanedNOTE: When removing components from the primary gear assembly, account for the bushing that fits into the primary gear