2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 245Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 245


19Remove the cap screw securing the gear shift cam plate and guide to the gear shift cam; then remove the cam plate and guide
21Remove the three Phillips-head screws securing the oil pump; then remove the oil pumpNOTE: It may be necessary to use an impact driver to loosen the screws

! CAUTION
If servicing of the enginetransmission is due to lubrication-related problem, replace the oil pump

Back to 2008 Arctic Cat 400/500/650/700 ATV Service Manual