2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 235Get this manual
5Carefully lift the reel from the case making sure the spring does not accidentally disengage from the case Assembling 1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting lug in the case; then wind it in counterclockwise direction until the complete spring is installedNOTE: The spiral spring must seat evenly in the recoil case
! WARNING
Care must be taken when lifting the recoil free of the caseWear safety glasses to avoid injury
6Remove the protective cover from the starter handle and pull the rope out of the handle; then untie the knot in the rope and remove the handleNOTE: Do not remove the spiral spring unless replacement is necessaryIf replacement is necessary, follow steps 7-8