2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 225Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 225

CCylinder HeadCamshaft DValve CoverRocker Arms NOTE: Steps 1-5 in the preceding sub-section must precede this procedure
6Place the chain guide into the cylinder
! CAUTION
Care should be taken that the bottom of the chain guide is secured in the crankcase bossCC272D

9Loosely install the five cylinder head nuts

7Place new head gasket into position on the cylinderPlace the alignment pins into position; then place the cylinder head into position on the cylinder

Back to 2008 Arctic Cat 400/500/650/700 ATV Service Manual