2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 207Get this manual
17Secure the shift rod to the engine with new E-clip FI092B
21Install the side panels into positionCD774
18Place the left-side footwell and foot peg in position on the frame; then secure with existing hardwareTighten securely19Install the front body panel with existing hardware20Connect the hose to the fuel pumpdelivery pipe; then connect the vacuum hose and secure with hose clamps (500650 H1) or connect the gasline hose connector to the fuel rail (700 H1 EFI)
22Place the battery into position in the battery compartment; then install the battery cables and vent hoseSecure with the battery cover