2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 192Get this manual
NOTE: Make sure the spacer is on the base or damage to the fixed face will occur when the spring is compressed CD056
Inspecting 1Inspect the pulley faces for wear, galling, or grooving2Inspect the O-rings on the movable face for nicks, tears, or swellingCD048
2Apply multi-purpose grease to the O-rings and grease seals on the movable face; then install on the fixed face making sure the alignment marks are properly aligned
3Inspect two grease seals in the movable face for nicks, cuts, or damage