2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 191Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 191

9Firmly holding the spring and spring holder, remove the wing nut; then remove the spring CD050

! WARNING
The spring assembly is under pressureExtreme care must be taken when relaxing the springAlways wear safety glassesUse proper tools onlyCD053

6Using spanner and suitable breaker bar, loosen the notched-ring nut; then spin the nut free of the hub
10Using thin pry-bar or screwdriver, work the movable face sleeve upward and free of the O-rings; then remove the sleeve

Back to 2008 Arctic Cat 400/500/650/700 ATV Service Manual