2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 187Get this manual
7Remove the cap screws securing the clutch coverNote the location of the different-lengthed cap screws for installing purposesUsing rubber mallet, carefully remove the coverAccount for two alignment pins
KEY AOil Pump Driven Gear BOil Pump Drive Gear CClutch Shoe Assembly
DOne-Way Clutch (Green Dot MUST Show) EFinal Drive Carrier Bearing Housing FInput Shaft CC829B
8Remove the one-way clutch (D) from the clutch housingNote the location of the green alignment dot (or the word OUTSIDE) for installing purposes9Using hydraulic press, remove the clutch housing assembly from the clutch coverAccount for the left fixed drive spacer and an O-ring inside the fixed drive spacer