2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 178Get this manual
Left-Side Components NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
3Using cold chisel, scribe mark showing the relative position of the shift arm to the shift arm shaft to aid in installing; then remove the shift arm
AT THIS POINT
To service any one specific component, only limited disassembly of components may be necessaryNote the AT THIS POINT information in each sub-section
NOTE: The enginetransmission does not have to be removed from the frame for this procedure
4Remove the two cap screws securing the speed sensor housing; then remove the housingAccount for the gasket and two seal washers
Removing Left-Side Components
ARecoil StarterOuter Magneto Cover BWater Pump CCover DRotorFlywheel
NOTE: The H1 models are not equipped with recoil starterCD920A