2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 158Get this manual
13Secure the carburetorthrottle body assembly up and away from the engine14Remove the E-clip securing the shift rod to the engine shift arm; then allow the shift rod to swing forward and hang straight down from the shift lever CD805
NOTE: It is advisable to lock the brake when loosening the cap screws securing the rear driveshaft
19Remove the positive cable from the starter motor and route it out of the way
15Remove the springs securing the muffler to the exhaust pipe; then remove the mufflerAccount for the two exhaust springs