2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 154Get this manual
7Install the cooling ducts with clamps and tighten the clamps securely CD797A
10Connect the temperature sensor leads to the main wiring harness11Secure the wires to the frame with nylon ties12Connect the speed sensor lead to the wiring harness13Secure the positive cable to the starter motor14Secure all wiring to the frame and upper engine bracket with cable ties15Secure the two oil hoses to the engine16Secure the crankcase vent hose to the air cleaner housing; then secure the inlet boot and carburetor to the air cleaner housing