2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 153Get this manual
Installing EngineTransmission NOTE: Arctic Cat recommends that new gaskets and O-rings be installed whenever servicing the ATV
1From the left side, place the enginetransmission into the frame; then slide the engine rearward as far as possible2Slightly raise the rear of the engine and engage the front drive coupler into the splines of the front drive output yoke; then slide the engine forward as far as possible
5Install two engine mounting through-bolts, two bushings, and two washers; then tighten the through-bolt flange nuts to 40 ft-lb