2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 139Get this manual
3Inspect two grease seals in the movable face for nicks, cuts, or damage
3Install the three pins and spacers into the fixed face hub; then pack the cam slots in the movable face with multi-purpose grease
4Inspect the pins and bushings for wear, flat spots, looseness, or crackingAssembling 1Place the fixed face of the driven pulley on the pulley compressor base making sure the dowel pins are engaged in the appropriate holes in the pulley faceNOTE: Make sure the spacer is on the base or damage to the fixed face will occur when the spring is compressed