2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 129Get this manual
3Slowly release the friction plate and lift the plate with ratchet guide free of the recoil case; then remove the ratchet guide from the friction plate B605D
! WARNING
4Remove the spring cover, spring, and shaft; then remove the ratchet and account for the pin
Care must be taken when lifting the reel free of the caseWear safety glasses to avoid injury
6Remove the protective cover from the starter handle and pull the rope out of the handle; then untie the knot in the rope and remove the handleNOTE: Do not remove the spiral spring unless replacement is necessaryIf replacement is necessary, follow steps 7-8