2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 128Get this manual
10Remove the shift detent camNote position of spacer for installing purposes11Remove the cam stopper assembly12Remove the spacer from the driveshaft noting the direction of the stepped side for installing purposes Servicing Left-Side Components
RECOIL STARTER Disassembling
! WARNING
Always wear safety glasses when servicing the recoil starter
! WARNING
During the disassembly procedure, continuous downward pressure must be exerted on the reel so it does not accidentally disengage and cause injuryMD1224
13Remove two starter motor cap screws
1Rotate the reel counterclockwise until the notch of the reel is near the rope guide in the caseGuide the rope into the notch and slowly allow the reel to retract until all spiral spring tension is released