2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 109Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 109

23Remove the cap screw securing the engine ground wire to the engine24Remove the two engine mounting through-boltsAccount for spacer on the lower front bolt CD085

NOTE: It is advisable to lock the brake when loosening the cap screws securing the rear driveshaft
17Remove the positive cable from the starter motor and route it out of the way18Disconnect the speed sensor lead from the wiring harness

Back to 2008 Arctic Cat 400/500/650/700 ATV Service Manual