2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 103Get this manual
Installing EngineTransmission NOTE: Arctic Cat recommends that new gaskets and O-rings be installed whenever servicing the ATV
1From the left side, place the enginetransmission into the frame; then move it rearward as far as possible2Raise the rear of the engine enough to engage the front driveshaft into the splines of the front drive output yoke; then slide the engine forward as far as possible
5Install the lower rear engine mounting through-bolt, spacer, and washer; then install the lower front engine mounting through-bolt, spacer, and washerSecure with the flange nutsTighten to 40 ft-lb