2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 81Get this manual
2Inspect the depth of the grooves in the clutch shoesIf any shoe is worn to the bottom of the groove, replace the complete set 2Overall length must not exceed minimum specificationsAssembling Primary Clutch
KEY 1234567
! CAUTION
Always replace clutch shoes as complete set or severe imbalance could occurPressure Disc Driven Plate Drive Plate Sleeve Hub Primary Gear Assy Washer Washer
ATV1014
Inspecting Centrifugal Clutch Housing 1Inspect the clutch housing for burns, marks, scuffs, cracks, scratches, or uneven wear2If the housing is damaged in any way, the housing must be replacedInspecting Primary One-Way Drive 1Insert the drive into the clutch housing2Rotate the inner race by hand and verify the inner race rotates only one direction3If the inner race is locked in place or rotates both directions, the drive assembly must be replacedMeasuring Clutch Spring Length 1Using calipers, measure the overall free length of the clutch spring737-731A